Catalog

JunGu’s Product Range

01

What Is Cold Forming?

Modern cold forming is a technique used for rapidly forming metal parts such as screws, bolts and many other fasteners. Cold forming, also referred to as cold heading, uses a heavy strike against a cold metal slug to shape it into its desired form. The force of the strike exceeds the metal’s yield strength, causing the metal to flow into the desired shape inside the carbide die.

02

Material

Gradient alloys use local decarburization to move the cobalt down from the sequence of A to B to C. Thus, the hardest point is at A, followed by B, and the softest point is at C because B and C are both softer than A.

To protect the alloy from getting damaged easily, there is a particular buffer in the process. The mold can disperse part of the force to improve the overall service life of the dies and save customers money.

what is gradient alloy and HOW IS SERVICE LIFE EXTENDED?

The higher the hardness of the traditional tungsten steel, the worse its toughness, which easily causes damage! While, the lower the hardness, the less wear resistance, and the service life fail to meet standards! Gradient alloys solve the contradiction of the performance of traditional tungsten steel! It has both high toughness and high hardness! It makes the mold resistant to impact and wear! It makes up for the defects of excessive design loading of forging engineering! (The service life extends by 3-6 times)

Catalog

Carbide Dies /

Faster Forming Dies

DIE CASE

DIE PIECE

DIE INSERT

PUNCH CASE

DIE SPACER

CUT-OFF DIE

CUT-OFF KNIVES

PUNCHES

DIE FINGERS

FEED ROLLERS

Nut Forming Dies

PUNCH SLEEVE

INDEX ROLLERS

CUT-OFF DIE

FEED ROLLERS

CUT-OFF KNIVES

Special Shaped dies

Triangular dies

Six-pc dies

Plum punches

Gear rolling die

Punches /

Header Punch

Punch

Fastener Tools /

Fastener Tools

04

Carbide Grades for Your Dies

JunGu can make your dies to any carbide grade you specify, however, if you would like a recommendation our expert team will be more than happy to advise you on which grade will be best suited for your operations. For example, one grade will yield more stainless steel parts while others will be more efficient when forming copper. JunGu can analyses how your dies wear out and refer to years of experience to recommend the correct tungsten carbide for you. Furthermore, we will work with you to analyze and perfect your dies performance through feedback and testing. 

Contact us to receive our free analysis and a competitive quote.

SITE MAP

Home

Company Profile

 

 

Contact

Info@jungumoulding.com

Ph +86 137 6433 5488

WeChat ID: 137 6433 5488

Address

Feng Lin road 1, Shuangfeng, Taicang,

Suzhou, Jiangsu 215400

China

 

 

Suzhou JunGu Precision Moulding LTD © 2019 All rights reserved.